Autel MaxiDAS DS708 is a powerful scan tool that is able to customize many
special settings. Following displays an example of activating BMW 7 series E65
Dynamic Drive/Active Roll Stabilization with DS708 automotive diagnostic scan
tool.
What is Dynamic Drive?
Active Roll Stabilization (ARS) is an “active”
suspension control system design to reduce body roll in cornering, resulting in
improved handling. Dynamic Drive uses active stabilizers on the front and rear
axles to counteract the vehicle’s tendency to roll in a corner. Working
together with acceleration and position sensors, a management system and other
components, such as a compensation tank for sound control, the system ensures
supreme agility at all speeds, balanced reactions to load changes and
remarkably precise steering.
Instruction:
Well install DS708 diagnostic software
Connect Autel DS708 scanner with vehicle via OBD socket
Select vehicle region: European
Select vehicle make: BMW
Turn ignition OFF, wait about 10 seconds, turn ignition ON again
Select BMW series: 7 series
Select vehicle model: E65/E66/E68
Select detail vehicle model: 735i-N62-SAL
Select vehicle model version: EUR-LHD
Check and confirm your vehicle information
Select Services Function from Main group menu
Select Chassis control module
Select Dynamic Drive option
Select Startup
Select Start Startup
Follow the system prompts and accept the system notice
The control unit is currently carrying out an internal reset
Make sure there is fault code stored in ECU memory
Get on the car and test the result
Back to main program or exit the Autel DS708 scanner software program.
Connect Autel DS708 scanner with vehicle via OBD socket
Select vehicle region: European
Select vehicle make: BMW
Turn ignition OFF, wait about 10 seconds, turn ignition ON again
Select BMW series: 7 series
Select vehicle model: E65/E66/E68
Select detail vehicle model: 735i-N62-SAL
Select vehicle model version: EUR-LHD
Check and confirm your vehicle information
Select Services Function from Main group menu
Select Chassis control module
Select Dynamic Drive option
Select Startup
Select Start Startup
Follow the system prompts and accept the system notice
The control unit is currently carrying out an internal reset
Make sure there is fault code stored in ECU memory
Get on the car and test the result
Back to main program or exit the Autel DS708 scanner software program.
More how to use auto diag tool information please search WOBD2 BLOG
Autel Maxisys MS906
Aucun commentaire:
Enregistrer un commentaire