mardi 12 juillet 2016

Security key unlock the data Free Download

The following information has been verified available to share to a friend in need to download:
Age Superman without password security number saws .168
Age Superman without password security number saw .BIN
Sail engine computer (95040) zenaratame without password .BIN
Siofok no good data security .BIN
Reiz 2.5 IC701 RA86 89661-0P020.bin
Lexus -470 automatic matching key 93C56 raw data ..bin
Chrysler methods to relieve anti-theft system
Corolla 06 89666-02280 burglar match .bin
Beverly Elysee MP5.2-1.6 liter -93S46.YHF
Picasso 1,6 blank data engine (95080) .YHF
Audi engine 2.8 no data theft 95040i.bin
The new Audi 1.8T ECU eeprom data 4B0 906 018CA.bin
Elysee 16V engine (manual -95,160) blank data .YHF
Elysee 16v engine (95160-2823 Edition set has been done) Manual gear blank data .YHF
m6 good computer data 24C02.bin
HONDA2 [1] .3CG5 ENG original ECU data .YHF
HONDA 2.3ENG new ECU data .YHF
89661-0d350 initialization data Ville 2
03 Audi A8 fourth-generation anti-theft system
Beverly 1.4 (2005 model -93S46) engine data .YHF
Chinese engine computer data -95 040 original data
Chinese security cartridge chip data - data security box 05E6 OK
Modern anti-theft system settings
Toyota theft initialization procedure
Reply to this post can see the link to download package

Click here to download the data to lift anti-theft key

More Relation Techology information Please Search:

More Relation information Please Search: WOBD2 (World OBD2 Auto Diagnostic Tool)

jeudi 7 juillet 2016

What different XTOOL EZ500 with EZ400 EZ300 Xtool PAD

Vehicle Diagnostic Tools became more and more improtant in Vehicle field

But where can i find a beeter one for my car?

Following comparison table among X100 EZ500, EZ400, EZ300 and X100 PAD proves EZ500 meets all you needs.
Full-System DiagnosisYes YesEngine, ABS, SRS, AT
Key ProgrammingYesYes  
Oil Reset/Engine Oil Light ResetYesYesyesyes
EPB Electrical Parking Brake AdaptationYesYesyes 
TPS Throttle Body AdaptationYesYesyes 
Odometer AdjustmentYesYes  
EPS Electric Power Steering CalibrationYesYes  
Gear LearningYesYes  
ABS BleedingYesYes  
ECU ResetYesYes  
Tire Pressure Warning Light ResetYesYes  
Battery ResetYesYes  

X100 EZ500 works with both gasoline and diesel vehicles.
X100 EZ500 diagnostic tool for diesel Heavy duty most details including One-click software update via WIFI, Remote access, Diagnosis reports in PDF file, vehicle coverage, Full System Diagnosis, Basic Function, Special Function, specification and package:

xtool-ez500-hd-heavy-duty-diagnosis-1 xtool-ez500-hd-heavy-duty-diagnosis-4

XTOOL EZ500 made by Xtool Company in Shenzhen is tested ok on both gasoline & diesel vehicles and provide full-system diagnosis and special functions, which surpass the older Xtool device such as Xtool EZ400, Xtool EZ300 and X100 PAD. Xtool EZ500 covers all the functions of Xtool EZ400, EZ300 and X100 PAD, therefore Xtool EZ500 is the best option for workshop.
Xtool EZ500 Nice Features:
Based on Android system, its open source Android operating system provides fast boot-up and multitasking.
Covers a wide range of vehicles from US, Asia and Europe.
Easy registration with EZ500 HD connected to WIFI
One-click software update via WIFI
Remote access
Diagnosis reports in PDF file
Record and playback live data
8.0 inch multi-touch screen
On-board battery

mardi 5 juillet 2016

How to use ATMEGA64?

Solder new Atmega64 MCU to your xprog. Overwrite all files and folders from Xprog_Preinstalled, to your native Xprog install. Usualy c: \Program Files\ELDB\Xprog or c:\Program Files(X86)\ELDB\Xprog.
You can now start and Run Xprog. If you want to use this version on brand-new PC, please install Xprog 5.0 and Adobe acrobat reader before copy files.

When you run Xprog, you will see see ATMEGA64 software has full authorization shown as follows:

lundi 4 juillet 2016

MVCI Toyota Techstream Unable to Connect to VIM Problem

Summary: Xhorse MVCI users got error: unable to Connect to VIM , during connect techstream via mvci to Toyota car models. How to fix?
Xhorse MVCI users got error: unable to Connect to VIM , during connect techstream via mvci to Toyota car models as following picture shows:
WOBD2 engineer answer: It’s not Xhorse product quality problem, but you need a simple reset, set the area to Europe.

Step-by-step to do as follows:
  1. open Techsream software, in the toolbar click "Setup-Techstream conficuration"
  1. Area Selection: select "Europe" under the drop list among Japan, North America, Europe and other.
  1. Default Language Selection
  1. Techstream Conficuration: no need input nothing, click OK.
Note: if the above solution not work, try these:
  • In the Techstream toolbar, click " Help- DLC3 Cable Check " to check your conectivity problems with car.
  • Try to install on another desktop, better with windows XP.

MVCI Toyota Techstream video

More Product information Please Search: WOBD2 (World OBD2 Auto Diagnostic Tool)

dimanche 3 juillet 2016


  1. After Installing the BMW Standard Tools, make sure you have a connection in INPA and both dots are black. If that is ok you can move on to the next step.
  1. Open NCS EXPERT and load your coding profile.
  • Load the ExpertProfile or Expertenmodus
  • After loading the profile, click on File -> Edit Profile and at the password prompt don`t write anything, just click OK. This is valid for the latest version with the latest updates (SP Daten) . We recommend buying it if you want to be up to date with everything and if you`re just stating to learn how to code because it includes many tutorials on how to install and use the software. For the older versions of NCS EXPERT, use the password “repxet”.
  • Make sure to set everything up like in the pictures:

image005 image006
Consistency check should result OK
After making these modifications go ahead and click File->Save profile as and save it as “CODING.pfl”, then go to File->Edit Profile>Profile Info and change the name to whatever you want, then exit and click again on File->Save Profile.
You have created you own coding profile! Now let`s go ahead and learn how to use NCS EXPERT to code features on a car.

As an example we will show you how to code the Digital Speedometer on your instrument cluster or KOMBI – This is the module name.
  1. Open NCS EXPERT and load the coding profile you created earlier.
  2. Click ok “VIN/ZCS/FA,” then on “ZCS/FA f. ECU” and choose your chassis
  3. After choosing your chassis you should see ncs expert read and display your VIN number, then click on “Back”
  4. Click on Process ECU and choose KOMBI, then click on Read ECU
  5. Close the pop up window and go to your Work Folder (C:\NCS EXPERT\Work) and open up the FSW_PSW.TRC file in Notepad.
  6. Click on Edit->Find and search for “BC_DIGITAL_V” and set it from “nicht_aktiv” to “aktiv”
  7. Save the file as and click on to overwrite the existing file.
  8. Now go to the NCS EXPERT window and “Change job” to SG_CODIEREN and “Execute Job”
If you followed the stept correctly, after the coding ended you should have the digital speedometer in your cluster menu. Look for it by using your BC Button to scroll through the menus. It should be the last one showing V= 0 km/h or miles/h depending on where you`re located.
The above steps are the same for coding any mods, the only thing that can change is the module name we`re working on.
Most used module names:
CAS – Central Access System
KOMBI – Instrument Cluster
FRM/NFRM – Light Module or Footwell ModuleCCC – Navigation module on older E series
CIC – Navigation module on newer E series
ABG – Airbag Module
NCS EXPERT can be used in a variety of ways, this being the easiest. In our future tutorials we will show you how to change the VO (Vehicle Order) for retrofits, how to change the manufacturing year and what`s the point of doing that, how to recode or reset a module with standard factory settings and even how to change the VIN number on a used module by using another very handy piece of software called Tool32.

Other relation key programmer SKP900