Step by step guide setup Bluetooth ELM327 OBD2 scanner on Win7/8

STEP 1
Connect the OBD-II Cable to your vehicle’s OBD-II Port.

STEP 2
Go to Settings on your iPhone, iPod Touch, or iPad.

STEP 3
Go into the Wi-Fi settings.

STEP 4
Turn on Wi-Fi and connect to the network created by your WiFi interface. The Kiwi WiFi creates a network named PLXDevices, and the OBDLink WiFi creates a network named ScanTool.net. Contact your hardware manufacturer if you can’t find the correct network.

If you are using an OBDLink WiFi, you’re done with this step. Go to step 5

If you do have a Kiwi WiFi or ELM327 WiFi, select the PLXDevices network or your ELM WiFi device name, and tap the blue arrow.

Select Static IP Address, and enter this information:
IP Address 192.168.0.11
Subnet Mask 255.255.255.0
Router 192.168.0.10

STEP 5
Run DashCommand™ software!

More Other Relation Auto scanner Product : Foxwell nt300

Relation News Search : Autel Maxisys